Lihlahisoa
SCK300 letoto la maqhubu converter
likarolo tsa sehlahisoa
Ho amoheloa li-processor tsa morao-rao tse laolang moto-control (DSP) tse nang le maqhubu a oache a fihlang ho 150Hz.
Li-motor tsa Asynchronous le taolo ea li-motor synchronous tsa ka ho sa feleng lia tšehetsoa, ka mokhoa o nepahetseng oa autotuning. Li-profiles tse peli tse ikemetseng tse ikemetseng li hlophisitsoe, 'me phetoho ea li-motor tse peli e ka bonoa ka ho beha paramente kapa ho kenya terminal.
ln V/Fcontrol mode e nepahetseng ea hajoale ea taolo e lekantsoeng e etsa bonnete ba hore ha ho na phoso e fetelletseng e etsahetseng ho sa tsotelehe hore li-drive li ntse li matha ka lebelo la ho potlakisa / ho thella, kapa maemo a notletsoeng a rotor, a sireletsang li-drive hantle.h mokhoa oa ho laola vector, torque e nepahetseng ea taolo e lekantsoeng e etsa boitlamo bo matla kapa bo itekanetseng bo lumellanang le litlhoko tsa kopo, ho sireletsa mochine hantle.
Mokhoeng oa taolo o arohaneng oa V/F, maqhubu a motlakase a hlahisoang le a cutput voltage a ka hlophisoa ka ho latellana ft bakeng sa lits'ebetso, joalo ka mehloli e fapaneng ea matla a maqhubu, li-motor tsa torque, jj.
| Mokhoa oa ho laola | Torque e qalang | Lebelo la lebelo | Ho nepahala ha lebelo | Karabelo ea torque |
| taolo ea V/F | 0.5Hz180% | 1:100 | ±0.5% |
|
| Taolo e se nang kutlo 1 | 0.5Hz 180% | 1:100 | ±0.2% | <10ms |
| Taolo e se nang kutlo 2 | 0.25Hz 180% | 1:200 | ±0.2% | <10ms |
| Taolo ea lebelo-senso | OHz200% | 1:1000 | ±0.02% | <5ms |
Ho kenya matla
| E lekantsoe matla a ho kenya | Lintlha tse kentsoeng hajoale | Khafetsa | Sebaka sa motlakase se lumelletsoeng |
| 3-mohato 380VAC/400VAC/415VAC 440VAC/460VAC/480VAC | SHEBA tafole “Modeland litekanyetso tsa tekheniki ea SCK300 series' | 50HZ/60Hz, mamello ±5% | Ho feto-fetoha ha motlakase ka tatellano ± 10%, e khuts'oane feto-fetoha-15% ~ 10% ie.323V ~ 528V Sekhahla sa ho se leka-lekane ha motlakase:<3%,THD e kopana le litekanyetso tsa IEC61800-2 |
Phallo ea matla
| Enjene e sebetsang | E lekantsoe hajoale | Matla a tsoang | Nako ea tlhahiso | Bokhoni ba mojaro o fetang |
| Sheba tafole "Mohlala le litekanyetso tsa tekheniki ea SCK300ceriau.F | Sheba tafole "Model le litekanyetso tsa tekheniki tsa SCK300 letoto" | 3-mohato: 0 e kentsoeng matla a motlakase, phoso e ka tlase ho ± 3% | 0.00HZ-600Hz Qeto ea 0.01HZ | 150% 1min: 180% 10s; 200% 0.5s. hang ka metsotso e 10. |
Litšobotsi tsa ho laola
| Mokhoa oa Contol | taolo ea V/F | Potlako-sensor | Soeed-sensor | Taolo ea sensor ea lebelo |
| Torque e qalang | 0.5Hz180% | 0.5Hz180% | 0.25H180% | 0Hz 200% |
| Lebelo la lebelo | 1:100 | 1:100 | 1:200 | 1:100 |
| Ho nepahala ha lebelo | ±0.5% | ±0.2% | ±0.2% | ±0.02% |
| Lebelo le ripple | - | ±0.3% | ±0.3% | ±0.1% |
| Taolo ea torque | NO | NO | Ee | ho joalo |
| Ho nepahala ha torque | - | - | ±7.5% | ±5% |
| Karabelo ea torque | - | <10ms | <10ms | <.5ms |
| Ho beha maemo | - | - | - | ±1Mothapo oa sekhahla±1 |
Mesebetsi ea motheo
| Leqhubu la ho qala | 0.00Hz-600.00Hz |
| Nako ea Accel/Decel | 0.00s-3600s |
| Mokhanni oa fequency | 1.0KHz~ 15.0KHz |
| Freguency command mod | Digital setting +Keypad Up/Down: Digital setting+terminal Up/Down.Communication setting.Analogsetting: All/AI2/AB.Terminal pulse setting. |
| qala mekhoa | Qala ho tloha ho qala khafetsa.DC ente braking qalong;Ho qala ka sefofane. |
| Emisa mekhoa | Ramp ho emisa.Lebopo ho emisa.Braking ea ente ea DC sebakeng sa 'mila. |
| Matla a mariki a matla | Braking unit e bakileng gagamalo: 650-750V.Nako ea tšebeletso: 0.0-100.0s.Brake diyuniti ea SCK300G3-037le ka tlase ke li-opti tse hahiloeng feela. |
| Bokhoni ba braking ea DC | Maqhubu a ho qala a braking ea DC: 0.00-600.00Hz.DC braking current: qala torque 0.0 ~ 100%.DC nako ea braking: 0.0-100s. |
| Lisebelisoa tsa ho kenya | Li-terminals tse robeli tsa ho kenya li-switching, terminal e le 'ngoe ea lebelo le phahameng la pulse input.Tšehetso node e omileng, PIP e sebetsang, mokhoa oa ho kenya NP; Li-terminals tse peli tsa analog, e 'ngoe ea tsona e ka sebelisoa feela joalo ka motlakase 'me e 'ngoe ke ea boikhethelo. |
| li-terminals tsa tlhahiso | Phallo e le 'ngoe ea lebelo le phahameng (0-50kHZ square wave wave le liphetho tse peli tsa analog (voltage/programmable ea hajoale) e ka hlahisa matšoao a joalo ka frequency ea taelo, maqhubu a tlhahiso, joalo-joalo tlhahiso e le 'ngoe ea dijithale.Liphetho tse peli tsa relay. |
| Ercode input terminal | Tšehetso ea 5V / 12V voltage grade.Tšehetsa OC push-pull.sesupo sa phapang inputsand joalo. |
Tikoloho
| Tšimo | Bophahamo | Mocheso | Mongobo | Ho thothomela | Polokelo |
| Menyakong, ha ho khanya ea letsatsi e tobileng, | 0m-2000m:de-rate | -10C-+40℃ | 5%-95% | Ka tlase ho thar | -40 ℃-+70 ℃ |
Tlhaloso ea ts'ebetso ea li-terminals tsa SCK300
| Sehlopha | Kenyelletso ea analoji | |
| Theminale | Tlhaloso ea terminal | Tlhaloso |
| +10V | Kenyelletso ea analoji motlakase oa litšupiso | Matla:10.3V±3% Boholo ba tlhahiso ea hona joale: 25mA.ad khanyetso ea potentiometer ea kantle e lokela ho ba kholo ho feta 4000 |
| GND | Sebaka sa Analog | Isolated ho tloha COM hare-hare ly |
| AI2 | Analog input 2 | Matla a motlakase le a hona joale e ka ba 0-10V / 0-20mA, e ka fetoloang ka ho fetola tsela J4. Kenyelletso ea ho kenya: motlakase ke 20kΩ, tlhahiso ea hajoale ke 500kQ Qeto: Ha 10V e lumellana le 50Hz, qeto e fokolang ke 5mV Phoso ±1%,25°C |
| A13 | Analog input 3 | -10V ~ 10V motlakase Kenyelletso ea ho kenya: 20kO ka ho kenya motlakase Qeto: Ha 10V e lumellana le 50Hz.qeto e fokolang ke 5mV Phoso ±1%,25°C |
| Sehlopha | Kenyelletso ea analoji | |
| Theminale | Tlhaloso ea terminal | Tlhaloso |
| AO1 | Sephetho sa Analog 1 | 0mA-20mA;impedance200-500Ω.0-10V:impedance>10kΩ2. 0mA-20mA;ho kenya impedance 500Q, boholo ba ho kenya hona joale 25mA. Fetola J1 botong ea taolo bakeng sa ho tlola lipakeng tsa0~20mAand0~10V.Factory default:0-10V. |
| AO2 | Sehlahisoa sa Analog 2 | 0mA ~20mA:impedance200~500Ω.0~10V:impedance>10kΩ. 0mA-20mA; kenoa impedance 50002.maximum input jwale 25mA. Fetola J2 botong ea taolo bakeng sa ho tlola lipakeng tsa 0-20mA le 0-10V.Feme ea kamehla 0-10V. |
| CND | Sebaka sa Analog | Ho tloha ho COM Interior ly |
Tlhaloso ea ts'ebetso ea li-terminals tsa SCK300
| Sehlopha | Theminale | Tlhaloso ea terminal | Tlhaloso | |
| Dijithale | DO1 | sekokelli se bulehileng | mefuta ea motlakase: 0-24V | Boemo ba hona joale: 0-50mA |
| HDO | bula moqokelli ka ntle/ Ho ntsha | Bula tlhahiso ea pokello: e ts'oanang le DO1 | Pulse e hlahisoang ke 0 ~ 50KHz | |
| Tlhahiso ea relay | RO1A/RO1B/RO1C RO2A/RO2B/RO2C | Lihlopha tse peli tsa lihlahisoa tsa relay | RO1A pheletso e tloaelehileng.RO1B hangata e kwetswe.RO1C hangata e bula RO2A pheletso e tloaelehileng.RO2B hangata e kwetswe.RO2C e butse kamehla | Boemo ba ho ikopanya: 250VAG3A.30VDC1A. |
| Sehlopha | Kenyelletso ea analoji | |
| Theminale | Tlhaloso ea terminal | Tlhaloso |
| +24V | +24V | 24V±10%, e arohaneng le GFNID ka hare ho naha Matla a phahameng a 200mA |
| PLC | Theminale e tloaelehileng ea ho kenya ka dijithale | Fetola lipakeng tsa boemo bo holimo le bo tlase. E khutsufalitsoe ka ± 24V nakong ea ho beleha. boleng bo tlase ba tlhahiso ea dijithale e nepahetseng, keno ea matla a kantle. |
| COM | + 24V fatše | E arohane le GNID ka hare |
| S1-S8 | Li-terminals tsa ho kenya li-digital1-8 | Kenyelletso:24VDC.5mA Maqhubu a maqhubu: 0-200Hz Matla a matla: 10-30V |
| HDI | Digital input/Pulse input | Matla a matla: 10-30V Kenyelletso ea dijithale: e ts'oanang le S1-S8 Pulse input: 0.1 ~ 50kHz; |
| Cate gory | Sebopeho sa Terminal 485 | Keypad 485 interface |
| Theminale | Tlhaloso ea terminal | Tlhaloso |
| 485+ | Letšoao le fapaneng la 485+ | Sekhahla: 1200/2400/4800/9600/19200/38400/57600bps |
| 485- | Phapang pakeng tsa 485- | |
| GND | 485 puisano e sirelelitsoe fatše | E arotsoe ho tloha ho COM ka nako e le 'ngoe |
SCK300 -ining setšoantšo sa 380V mohato o le mong oa AC Drive
Kakaretso le tekanyo ea ho kenya
| Mohlala | SCK300 letoto la ponahalo le litekanyo tsa ho kenya (mm) | ||||||
| W | WI | H | H1 | D | D1 | Φ | |
| SCK300 G3-0D75 | 108 | 96 | 134 | 118 | 149 | 140 | 5 |
| SCK300 G3-1D5 | |||||||
| SCK300 G3-2D2 | |||||||
| SCK300G3-004 | |||||||
| SCK300 G3-5D5/P3-7D5 | 180 | 167 | 240 | 228 | 214 | 205 | 5.5 |
| SCK300G3-7D5/P3-011 | |||||||
| SCK300 G3-011/P3-015 | |||||||
| SCK300G3-015/P3-018 | 225 | 200 | 354 | 330 | 211 | 205 | 6 |
| SCK300G3-018/P3-022 | |||||||
| SCK300G3-022/P3-030 | |||||||
| SCK300G3-030/P3-037 | 240 | 165 | 450 | 433 | 236 | 230 | 7 |
| SCK300 G3-037/P3-045 | |||||||
| SCK300 G3-045/P3-055 | 240 | 160 | 560 | 545 | 331 | 321 | 7 |
| SCK300 G3-055/P3-075 | |||||||
| SCK300G3-075/P3-090 | 270 | 195 | 640 | 617 | 378 | 368 | 10 |
| SCK300G3-090/P3-110 | |||||||
| SCK300 G3-110/P3-132 | |||||||
| SCK300G3-132/P3-160 | 352 | 220 | 800 | 777 | 418 | 408 | 10 |
| SCK300 G3-160/P3-185 | |||||||
| SCK300G3-185/P3-200 | 360 | 200 | 940 | 912 | 494.5 | 484.5 | 17.5 |
| SCK300G3-200/P3-220 | |||||||
| SCK300G3-220/P3-250 | |||||||
| SCK300G3-250/P3-280 | 370 | 200 | 1140 | 1112 | 575.5 | 565.5 | 17.5 |
| SCK300G3-280/P3-315 | |||||||
| SCK300 G3-315/P3-350 | 400 | 240 | 1250 | 1222 | 560 | 550 | 17.5 |
| SCK300G3-350/P3-400 | |||||||
| SCK300 G3-400/P3-450 | |||||||
Tlhokomeliso: litekanyo tse ka holimo li ka fetoha ntle le tsebiso pele.
